Micky HaHa Power Cover


The Micky Ha Ha Power Point Safety Cover stops children having access to power points. You simply peel off the tape on the base and push it firmly against the wall where the power outlet is. The base fits snuggly around the power point and the appliance cords are directed out through slots in the cover. The top cover clips on to the base with 2 child resistant catches. It can be installed in literally a minute without drilling or the use of any tools.

The clear rounded design allows the user to see the status of the power point without removing the cover, but stops children being able to pull plugs out or even turn the switches on or off.

Note: The product works well with standard plugs for most appliances, such as shown in the image here. It might not work with bulky plugs, such as mobile chargers, for example.


The Micky Ha Ha Power Point Cover can be turned so that cords can be directed out either the top or the bottom.

If you don’t have children but have children visit sometimes, the base can be left on the wall permanently and the top clipped on only when children visit.

The product is also ideal for workshop areas where dust, dirt and sparks are a problem. The safety cover protects the power point and prevents accidental unplugging.

The Micky Ha Ha Power Point Safety Cover will fit most standard Australian power points such as Clipsal and HPM.

Note when first installing the product that the adhesive increases in strength over 24 hours so minimal handling at first is recommended. For non-painted surfaces or for more permanent installation, there are two locating holes in the top and bottom of the base. We recommend using screws to attach the cover to the wall as this will be the most solid installation method.

To clean the product, use a damp cloth, NOT solvent-based cleaners, abrasive cleaners or harsh chemicals as discoloration could occur and can damage the surface.

Additional information

Weight249 g
Go to Top